Product ID:17875 WHITE LATEX PC D10230
MSDS Date:09/14/1991
FSC:8010
NIIN:01-344-5115
MSDS Number: BNWYH

PPG INDUSTRIES INC

ONE PPG PLACE
PITTSBURGH, PA 15272
US

Emergency Phone: 304-843-1300

Info Phone: 304-843-1300

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

DEIONIZED WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45-50%

DIETHYLENE GLYCOL MONOPROPYL ETHER (SARA 313)

CAS: 6881-94-3

Fraction By Weight: 2-5%

2,2,4 TRIMETHYL 1,3 PENTANEDIOL ISOBUTYRATE

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

FILM FORMERS, RESINS AND ADDITIVES

Fraction By Weight: 20-25%

QUARTZ IS A COMPONENT OF ONE OR MORE OF THE ABOVE

RTECS: 9999999ZZ

Fraction By Weight: <1%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:INGEST: HARMFUL OR FATAL. EYE:
IRRITATION. SKIN: SLIGHT IRRITATION. INHALATION: VAPOR/SPRAY OR
SANDING/GRINDING DUST HARMFUL. CHRONIC OVEREXPOSURE: ANIMAL
STUDIES-LUNG TUMORS. OVEREXPOSURE NOT EXPECTE D, SO NO SIGNIFICANT
HAZARD FOR MAN. SILICOSIS (LUNG INJURY).
Explanation of Carcinogenicity:CONTAINS A FORM OF CRYSTALLINE
SILICA/QUARTZ WHICH IARC ASSOCIATES WITH AN INCREASED RISK OF
CANCER IN LAB ANIMALS.
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION AND VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
CRACKING, BURNING, REDNESS AND SWELLING ARE CONDITIONS ASSOCIATED
WITH EXCESSIVE SKIN CONTACT.

First Aid:INGEST: DON'T INDUCE VOMITING. EYE: FLUSH EYES IMMED W/WATER,
15 MIN. SKIN: FLUSH IMMED W/WATER FOLLOWED BY WASHING W/SOAP &
WATER. INHAL: REMOVE TO FRESH AIR. APPLY ARTIF RESPIRATION & OTHER
SUPPORTI VE MEASURES AS REQUIRED. OTHER: IF INGESTION, ANY TYPE OF
OVEREXPOSURE OR SYMPTOMS OF OVEREXPOSURE OCCUR DURING/FOLLOWING USE
OF PRODUCT, CONTACT POISON CONTROL CTR/EMERG RM/DR. HAVE MSDS
AVAILABLE.

Flash Point Method:PMCC
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CO2, DRY CHEMICAL,
UNIVERSAL AQUEOUS FILM FORMING FOAM) TO EXTINGUISH NFPA CL IIIB
COMBUST.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, USE TO COOL
(PREFER FOG NOZZLES) CLOSED CNTNRS (PREVENT PRESSURE
BUILD-UP/AUTOIGNITION/EXPLOSION. FIREMEN SHOULD WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/RESPIRATORY/SKIN/EYE PROTECTION ALLOWED IN AREA. REMOVE
IGNITION SOURCES. TAKE UP SPILLED MATERIAL W/SAWDUST, VERMICULITE,
OR OTHER ABSORBENT & PLACE INTO CONTAINER FOR DISPOSAL.

Handling and Storage Precautions:DO NOT STORE ABOVE 120 F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED/PROTECTED FOR NFPA CLASS IIIB COMBUST
LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MAT'L IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ THE MATERIAL SAFETY DATA SHEETS FOR THE OTHER
COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARDS OF ALL OF ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS ADEQUATE, USE A SUITABLE
RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOCAL EXHAUST (VOL/PATTRN)-KEEP CONC
BELOW LOWEST TLV/LEL/STATED LIMIT/REMOVE DECOMP PRODUCTS.
Protective Gloves:NITRILE, NEOPRENE, LATEX GLOVES.
Eye Protection:CHEM SPLASH GOGGLES-IF CONTACT
Other Protective Equipment:WEAR PROTECTIVE CLOTHING CONSTRUCT OF
NITRILE, NEOPRENE OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAIMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:100 TO 244C
Vapor Pres:17.2
Vapor Density:> AIR
Spec Gravity:1.26
Evaporation Rate & Reference:32 (BU AC=100)
Solubility in Water:50.7%
Appearance and Odor:VISCOUS LIQUID WITH ODOR CHARACTERISTIC OF CHEM
FAMILY & SOLVENTS LISTED.
Percent Volatiles by Volume:65.60

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:HEAT OR WELDING, BRAZING,
FLAME-CUTTING SURFACES COATED W/MAT'L MAY PRODUCE FUMES INCLUDING:
CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AND APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.